all things new, what's been up, plans for the season

Blog posts are boring sometimes. Maybe even most of the time. I guess I wonder occasionally why I do it? Are there people that are interested in my ramblings? Do I do it for referral to what I've done and plan on doing? I can tell you that there are very few times that I have looked back to things. 

Blog posts are often boring if they are just words. I try to have pictures to add with captions for quick pass over viewing. It is irritating when you bring in a bunch of pictures in hopes to make a story of them and they scramble in what ever order they choose. Not sure how to control it, so I will do the best I can with what I have.

I did a couple of group fatbike rides this winter with my new Necro. I did a ride at Trapps family lodge in Stowe. I did an event at Burke Mountain called Winterbike. These two events were basically my introduction to snow biking. I found it to be quite a blast. I will be looking forward to putting some more time in on the bike this Spring to give it a little go at some trails.

Mark at Trapps

Trapps trail map

S24O

S24O

 I just rode the Necro for a ~60 miles round trip S24O from Essex to Waterbury and back. I stayed at a leanto at Little River state park. It is close enough to get there and back by bike in a short enough time. It was early in the season for Spring so I almost consider it a winter trip. I had a low of around 18*. The winter bag and some layers kept the cold at bay. I also borrowed an insulated sleeping pad for the trip and I think it made all the difference needed to make the night tolerable.

Trapps

Trapps

Trapps

Trapps

S24O

 I had set the Moment tent up on the leanto platform. I recently got the optional ridge pole for the tent that allows it to set up freestanding. It works fair enough but I think it would work best staked out. I think the plan for next winter is to use a bivy instead of the tent. Especially at a leanto, it would be a better setup.

Trapps (that's a whole lot of FAT)

S24O

S24O

S24O

Well, it's time to get the fitness up and the legs back for the warm riding season. I went for a two hour loop ride with some friends. Plenty of climbing which I have a tough time with but overall the ride went well and it felt good.

I need to get some off bike fitness stacked up to help me with the bike. I have some good plans for this year. There will be the usual events. I will probably to a century charity ride, the VT50. I want to do the brevet series. I want to get out for a 4 or 5 day New England dirt road tour. That will be a pacifier for missing this year's Tour Divide as well as give me a little taste of daily "eat, sleep, ride". I can't wait.

Stay tuned!

first day out to play

dry roads but still a blast

meet Fatty McFat Fat

Alfine 8spd IGH

Race Face Chester cranks with purple bling ring

Salsa Enabler fork and Salsa 135mm hub

Surly Nate tire

out on the frozen reservoir at Indian Brook

Fatty McFat Fat

Finally, I have the makings of a fatbike going on! It all started with an email to my friend Barney who had found some fat rims on his local (Maine) Craigslist. Didn't think much more about it than the usual intrigue. Then one day I shot him an email asking if he'd consider selling them to me. I was a bit surprised that he said yes right away. He sold them to me for what he got them for which was a considerable savings over retail.

Vicious Cycles Graceful Fat Sheba 80mm rims

 They are both drilled offset for a typical setup on a Pugsley. Since I plan on running an IGH, one of them would be fine but the other would need some mods for the front.

 Barney also had one tire that I got from him as well. Half way there!

 A rim that is drilled offset is perfect for an offset drivetrain. However, not so much for a symmetric front wheel. Therefore I laid out to drill some more spoke holes on the opposite side.

committed

 I was able to get a promo deal on Sapim Super Spokes so I thought that I would use them in this wheel build. They are so thin yet super strong. They will do their part to keep the wheels as light as they can be giving the components chosen.

now drilled for a symmetric wheel

 Drilling the extra 32 spoke holes went well. I did the layout with a rule and square and got them looking good. Then I used an automatic center punch on the marks and drilled them with sequential sized bits on the drill press. Good to go!

The frame. Surly Necromancer or Neck Romancer, formally Black Ops Pug

 I plan on building a frame. I have a lot of plans like that. In the meantime I bought this frame so that I can get out there and finally play in the snow like I want to. I really look forward to riding this bike. It should be a blast.

The rear dropouts. Decent setup for an IGH

Looks like I got broadsided by a car!

current weight of the GFS rims

 I have laid out for 1.25" holes to pull some weight off of the rims. Plus, you gotta show off the rim tape. I think it looks wicked with all the holes in the rims. If they fall apart, I will start over.

change my mind and stop now or go for it?

FAT Goodness

 The latest score was an incredible deal on a Enabler fork and Salsa front hub. What I love the most is that it is drilled for Anything Cages so I can use my PR bags on the fork. Time to start putting it all together.

For what it's worth

I reset the Tour Divide counter to the right. We'll see!

letting the cat out of the bag

I've been avoiding this post for a bit too long now. I originally was going to post it on the first day of the new year. Furthermore, I was going to have already told my friends. I didn't do any of that and here I am.

I will NOT be at the start line of Tour Divide 2013.

Oh, there is so much pain in seeing those words. It has been hard enough finally saying it out loud to myself and my wife. For many reasons which add up against me, I have to only hope that I will make it for 2014. Instead of actually making that claim, I am going to continue with forward momentum to make it happen. The "when" will work itself out.

To satisfy my desire for adventure, my wife came up with the clever idea that I should plan a small New England tour for next Spring. It would allow me to still have a trip and help with shaking out the kit and making sure everything is in order.

With that said, I leave it behind me and move forward. I have great plans for 2013 and I will now focus on making those work out the best they can.